Please contact me at Allison.Chowanec@launch3.net if you are interested in any of the following equipment:
| Part Number | Manufacturer | description |
| 135838 | Valmont | antenna mounting pipe, 2-38/” OD X 60″ LONG, GALVA |
| 158349 | Valmont | Ice Bridge 24″ x 10′ |
| 1787 | Valmont | Trapeze Kit |
| 31 B1534 | Valmont | Universal Pipe Adaptor Kit |
| 31-99521-GRY | Valmont | BTS 4 HOLE PORT |
| 31-B1449 | Valmont | Entry Panel, Valmont, 6, 4″ Ports (2X3), ALM |
| 31-B1664F | Valmont | Entry Boot |
| 31-B3023 | Valmont | Universal Pipe Adaptor Kit |
| 315023 | Valmont | Bracket Hardware |
| 38-6627-00 | Valmont | Ground Inspection Well |
| 78SS-A | Valmont | 7/8″ Stackable Snap-in ( kit of 10 ) |
| 800086 | Valmont | Handrail Kit for a 15′ Full Walkway Low Profile Platform, Valmont/SitePro1 |
| 802151 | Valmont | 7/8 – 1/4 coax 4 3/4 and 7/16 Hole Double T-Line Bracket |
| 802171 | Valmont | 7/8 – 1/4 Coax 8 3/4 and 7/16 Hole Double T Line Bracket |
| 802175 | Valmont | 7/8 – 1/4 Coax 14 3/4 and 7/16 Hole Double T Line Bracket |
| 802679 | Valmont | hardware kit, 1-1/2″ TO 3″ OD OR 1-3/4″ TO 4, LADD |
| 802754 | Valmont | Support Pad Steel |
| 99544 | Valmont | ballast tie-down kit, ROOF MOUNT ACCESSORIES, F |
| ACP10K | Valmont | Pipe to Pipe 1-1/2″ – 3-1/2″, Valmont/SitePro1 |
| ADAP | Valmont | Angle Adapter, Stainless Steel, B1852/3/8, (Pkg of 10), Valmont/SitePro1 |
| B-1790 | Valmont | 2 Hole Cushion 2.000″ (50.8 mm) 1-5/8″ (41 mm) coax |
| B1001 | Valmont | antenna mounting pipe, 2-3/8″ OD X 48″, GALVANIZED |
| B1400 | Valmont | 2 Hole cushion 1.560″ (39.6 mm) 1-1/4″ (32 mm) coax |
| B1461 | Valmont | antenna mounting pipe, 2-3/8″ OD X 84″, GALVANIZED |
| B1466 | Valmont | cushion hangers, 7/8″ & EW63 CABLE MODEL, SPECIAL |
| B1588 | Valmont | Z-Bracket, Valmont, Coaxial Cable Support, 12 Cable 2′ 6-1/2″ long |
| B1640 | Valmont | SINGLE CHAIN MOUNT KIT, MOUNTS TO ROUND POLE |
| B1665 | Valmont | universal wall mount, 1″ TO 4-1/2″ OD PIPE SIZE, |
| B1727 | Valmont | Site-Pro Boot Jacket only for 5″ diametercushion. Clamps included |
| B1739 | Valmont | standoff pipe mount, 4-1/2″ PIPE SIZE, WALL & PO |
| B174 | Valmont | spring, NUT, 1″ SQUARE, GALVANIZED, 3/8″ HOL |
| B1827 | Valmont | dual standoff mount, MOUNTS TO MONOPOLE BRACKET |
| B185 | Valmont | 2″-7″, ROUND MEMBER ADAPTERS, 5 PKG QTY |
| B1873 | Valmont | (4) 5/8″ x 24″ thru-bolt kit, WALL MOUNT HARDWARE |
| B1899 | Valmont | Angle Handrail Mount |
| B202 | Valmont | duct sealer, FOR ENTRY PANEL INSTALLS, SITE HARDW |
| B2127 | Valmont | Valmont/Microflect
Kit: Standoff Kit, 2″ To 3″ OD Pipe for 7/16″ Hole (Pkg. of 10) 31-B2127 |
| B400 | Valmont | 1/2″-1-7/8″, ROUND MEMBER ADAPTERS, 5 PKG QTY |
| B400 | Valmont | 1/2″-1-7/8″, ROUND MEMBER ADAPTERS, 5 PKG QTY |
| B501 | Valmont | 12″ W X 10′ LONG SOLID, BRIDGE CHANNEL, FOR |
| B511 | Valmont | bridge support angle, 3″ X 2-1/2″ X 1/4″ X 2′ W |
| B535 | Valmont | cushion hangers, 1-5/8″ (1 RUN) CABLE MODEL, SP |
| B535A | VALMONT | W/G boot 4″ 1-5/8 COAX-1/PK |
| B543 | Valmont | cushion hangers, EW/EWP90 CABLE MODEL, SPECIAL |
| B548 | Valmont | EW77 & EWP77, CUSHIONS, QTY 5, 1 HOLES |
| B548A | Valmont | 4″, BOOTS, EW/EWP77, 1 HOLE |
| B550 | Valmont | Entry Panel (2 Ports) PORT SIZE 5″ |
| B559 | Valmont | cushion hangers, WR137 CABLE MODEL, SPECIALTY HAN |
| B864 | Valmont | hex, NUT, 3/8″, STAINLESS STEEL, NUTS/BOLTS/WA |
| B868 | Valmont | lock, WASHER, 3/8″, STAINLESS STEEL, NUTS/BOLTS/WA |
| BA114 | Valmont | 4″ Boot Assembly Kit, 1-1/4″, Valmont/SitePro1 |
| BA12 | Valmont | 4″ Boot Assembly Kit, 1/2″ Cable, Valmont/SitePro1 |
| BA122 | Valmont | 4″ Boot Assy Kit ½” x 2 Hol, Valmont/SitePro1 |
| BA124 | Valmont | 4″ Boot Assembly, 4 x ½” Insert, Valmont/SitePro1 |
| BA129 | Valmont | 4″ Boot Assembly 1/2″ 9-Hole Cushion Insert, Valmont/SitePro1 |
| BA158 | Valmont | 4″ Boot Assembly 1-5/8″, Valmont/SitePro1 |
| BA158M | Valmont | 4″ Boot Assembly (1) 1/2″ & (1) 1-5/8″, Valmont/SitePro1 |
| BA204 | Valmont | Stainless Steel Banding 100′ Reel, Valmont/SitePro1 |
| BA206 | Valmont | 3/4″X100′ STAINLESS STEEL BANDING |
| BA214 | Valmont | 4″ Boot assembly for 2-1/4″ Coax, Valmont/SitePro1 |
| BA78 | Valmont | 4″ Boot Assembly Kit with 4 holes for 7/8 Coax, Valmont/SitePro1 |
| BA782 | Valmont | 4″ Boot Assembly (2) 7/8″ Hole, Valmont/SitePro1 |
| BA783 | Valmont | Coax Entry Port Boot for (3) 7/8″ Coax, 4″ boot VMI #BA1151A, Valmont/SitePro1 |
| BA784 | Valmont | 4″ Boot Assembly Kit with 4 holes for 7/8 Coax, Valmont |
| BB158 | Valmont | SITE-PRO ENTRY PORT BOOT 5″ (W) 1 5/8″ CUSHION |
| BBPM-K3 | VALMONT | Back to Back Pipe Mount. For Pipe Size 2-3/8″, Stand Off Arms 3-1/2″ – 6″ |
| BE1582 | Valmont | 6″ Boot with (2) 1-5/8″ coax holes, Valmont/SitePro1 |
| BE1583 | Valmont | 6″ One-Piece Boot (3) 1-5/8″, Valmont/SitePro1 |
| BE784 | Valmont | 6″ Boot with 4 – 7/8″ Hole Cushion, Valmont |
| BHDK | Valmont | Valmont, Ballast Tie-Down Kit |
| BU254-25 | Valmont | Stainless Steel Clips Bags of 25, Valmont/SitePro1 |
| BU256-25 | VALMONT | Stainless Banding Buckles 3/4″ |
| CAP4 | Valmont | 4″ Entry Port Cap-Black, Valmont/SitePro1 |
| CH120 | Valmont | 12″ COAX HARDWARE KIT |
| CH35 | Valmont | FALSE |
| CH65 | Valmont | 6-1/2″ Coax Block Hardware Kit (Box of 10), Valmont/SitePro1 |
| CH80 | Valmont | 8″ Coax Block Hardware Kit, Valmont/Site Pro1 |
| CH95 | Valmont | 9-1/2″ Coax Block Hardware Kit (Box of 10), Valmont/SitePro1 |
| CHGPS | Valmont | Chain Mount for Raycap Dome (Fits 6-1/2″ to 36″ OD Monopole), Valmont/SitePro1 |
| CHM2 | Valmont | Valmont, Double Sector Chain |
| CHM3 | Valmont | Triple sector Chain Mount, Valmont/SitePro1 |
| CHM3 | Valmont | Triple sector Chain Mount, Valmont/SitePro1 |
| CIN1478 | Valmont | 1/4″ Coax Barrel Cushion (Pkg of 10), Valmont/SitePro1 |
| CIN3878 | Valmont | LMR400,3/8″ Barrel Cushion (Pkg of 10), Valmont/SitePro1 |
| CIN58114 | Valmont | 5/8″ Cable Barrel Cushion (Pkg of 10), Valmont/SitePro1 |
| CLH | Valmont | Clamp Head Ea., Valmont/SitePro1 |
| CR-12-G | Valmont | Cable Runway, Valmont/SitePro1 |
| CR-9141 | Valmont | Hold Down Clamp Kit, Valmont |
| CR-NEO | Valmont | Neoprene End Cap for Runway Support box of 10, Valmont/Site Pro |
| CR-PCS-G | Valmont | Cable Runway Supports Telco Gray,Valmont/SitePro1 |
| CR-PCS-Y | Valmont | Cable Runway Supports Yellow Zinc, Valmont/SitePro1 |
| CR-SUP12 | Valmont | Runway Hanger Supports(C-Clip for ½” all-thread), Valmont/SitePro1 |
| CXB114 | Valmont | 1-1/4″Coax Block (Pkg of 10), Valmont/SitePro1 |
| CXB12 | Valmont | 1/2″ Standard Coax Block (Pkg of 10), Valmont/SitePro1 |
| CXB12 | Valmont | 1/2″ Standard Coax Block (Pkg of 10), Valmont/SitePro1 |
| CXB158 | Valmont | 1-5/8″ Coax Blocks 10 pk, Valmont/SitePro1 |
| CXB214 | Valmont | 2-1/4″ Coax Block (Pkg of 10), Valmont/SitePro1 |
| CXB78 | Valmont | FALSE |
| D-WM23WF-05M | Valmont | Male-Female RET control Cable 0.5 m |
| DCP18K | Valmont | Pipe to Pipe Clamp Set, 1.5, Valmont/Site-Pro |
| DSM2 | Valmont | Dual Standoff Arm – for 2-3/8″, 2-7/8″ or 3-1/2″ Pipe |
| E1118 | Valmont | Entry Panel, 12, 4″ Ports (3×4), Alum, Valmont/SitePro1 |
| E1199 | Valmont | Entry Panel, 4, 4″ Ports (2×2), ALM, Valmont/SitePro1 |
| E1447 | Valmont | Alum Entry Panel 16 Port (4×4) |
| E1447 | Valmont | Alum Entry Panel 16 Port (4×4) |
| E1448 | Valmont | Micro Fleet 2 Hole Port |
| E1448 | Valmont | Micro Fleet 2 Hole Port |
| E1449 | Valmont | Entry Panel (6) 4″ Ports (2×3), Alum, Valmont/SitePro1 |
| E1635 | Valmont | Entry Panel, 1 x 3 with 4″ Diameter Ports, Valmont/SitePro1 |
| E220 | Valmont | Alum Entry Panel 1 Port (1×1) |
| E575 | Valmont | 1X4Layout Aluminum Entry Port, Valmont/SitePro1 |
| E576 | Valmont | 2X4 4’ENTRY PANEL |
| EKS-400TT | Valmont | EKS400TT, Tinned Ground Kit for LMR400/LMR240 by Sitepro1, a Valmont company.
Design Criteria: The tinned ground kit for LMR400 is designed to comply with MIL-STD-188-124A and has been verified by independent labs to withstand the damaging effects of lightning current in excess of 200kA. Features: The 6-gauge, 7 strand copper wire provides the most practical and effective low inductance transfer of lightning induced current from your coax to your system ground. Construction: The pre-formed tinned copper strap and associated hardware facilitates a proper attachment to the coaxial cable, ensuring that the performance of the coax is not being compromised. Additional: 3 inches long, unattached lug, 1.45 pounds. |
| EPD1 | Valmont | duct seal compound, 1 LBS, 1, WEATHERPROOFING, CON |
| G12065 | Valmont | Hex Bolt, 1 1/2″ X 6-1/2″ Grade 5, Valmont/SitePro1 |
| GPS1 | Valmont | GPS Antenna Wall Mount, Valmont/SitePro1 |
| GPSP | Valmont | Universal GPS Mount, Mounts 1.5″ to 3.5″ pipes, Valmont/SitePro1 |
| GR5880 | Valmont | 5/8″ x 8′ Ground Rod Ea., Valmont/SitePro1 |
| HAND13 | Valmont | Handrail Kit for 13′ Face, Valmont/SitePro1 |
| HC2-10 | Valmont | 1-1/2″ – 3-1/2″ Round Member Adapter (Pkg of 10), Valmont/SitePro1 |
| HC3-10 | Valmont | 2-1/2″ – 4-1/2″ Round Member Adapter (Pkg of 10), Valmont/SitePro1 |
| HC4-10 | Valmont | 3-1/2″ – 5-1/2″ Round Member Adapter (Pkg of 10), Valmont/SitePro1 |
| HHD12-K | Valmont | 12″ Universal Cantilever Kit |
| HL208 | Valmont | #2 Lug (2) Hole 1/4″ w/ 5/8″ spacing and inspection Hole Stranded Wire |
| HL212 | Valmont | #2 Lug (1) Hole 3/8″ Stud W/Inspection Hole |
| HL214-B | Valmont | #2 Lug (2) Hole 3/8″ w/1″ spacing & Inspection Hole Stranded Wire |
| HRK14 | Valmont | Handrail Kit for Low Profile Co-Location Platform with 14’6″ Face |
| HWK58 | Valmont | Hollow Wall Mount Kit, Valmont/SitePro1 |
| IB24D-A2 | VALMONT | 24 in X10’IceBridgDblAn |
| LT-VSS-24-A | Valmont | 24″x12′ Straight Cover 2×6’pcs |
| LTF10-396 | Valmont | 10′ LIGHTWEIGHT T-FRAME, INCLUDES: R5 UNIVERSAL PIPE MOUNT, ATTACHMENT HARDWARE, TWO STIFF ARMS, AND ANTENNA MOUNTING PIPES (VALMONT PART) |
| LTF12-384 | Valmont | 10′ LIGHTWEIGHT T-FRAME, INCLUDES: R5 UNIVERSAL PIPE MOUNT, ATTACHMENT HARDWARE, TWO STIFF ARMS, AND ANTENNA MOUNTING PIPES |
| LTF12-496 | Valmont | Lightweight T-Frames, Valmont/SitePro1 |
| LWRM | Valmont | Universal Ring Mount 12″ – 45″, (Need RM-ADK Ring Mount), Valmont/SitePro1 |
| MAT18 | Valmont | Site Pro Rubber Mat, 1/2 X 18 X 48 (Micro #1), Valmont/SitePro1 |
| MG-ADAP-K | Valmont | Sold in pairs, of insulators and stainless steel angle adapters.Stainless steel hardware included.By SitePro, a Valmont Company |
| MG41236-K | Valmont | 12″ Mega Ground Bar Ea., Valmont/SitePro1 |
| MG42488-K | Valmont | 24″ Mega Ground Bar Ea., Valmont/SitePro1 |
| MM01 | Valmont | 8″ Support Arm, Valmont/SitePro1 |
| MM01 | Valmont | 8″ Support Arm, Valmont/SitePro1 |
| MM02 | Valmont | Standoff Arm, Single Antenna, 2′, Valmont/SitePro1 |
| MS6 | Valmont | Monople Coax Support Kit, 6 runs of coax, Valmont/SitePro1 |
| MST | Valmont | 1-1/2″ – 3″Tower Standoff Brackets 10pk, Valmont/SitePro1 |
| MST-U | Valmont | Medium Stand Off Univ. Bracket (Box of 10), Valmont/SitePro1 |
| NMC12 | VALMONT | Non-Metallic Flexible Conduit |
| P272 | Valmont | 2-3/8 x 72, Sch 40 Galv Pipe, Valmont/SitePro1 |
| P284 | Valmont | 2-3/8″ OD x 84″ Antenna Mounting Pipe |
| P296 | Valmont | Antenna Mounting Pipe 2 3/8″ OD x 96″, Valmont/SitePro1 |
| P3096 | Valmont | 2-7/8″ x 96″ Hot dipped galvanized, schedule 40 pipe, Valmont |
| P3150 | Valmont | 3-1/2″ x 150″ Bulk Pipe, Valmont/SitePro1 |
| P3216 | Valmont | Valmont, 3-12′ OD x 18 Ft |
| P360 | Valmont | Bulk Pipe-Sch 40 – 3-1/2″ x 60″ Face, Valmont/SitePro1 |
| PG12 | Valmont | 1/2″ Cushion Plug, Valmont/SitePro1 |
| PG78 | Valmont | SitePro Cushion Porthole Plug 7/8″, Valmont/SitePro1 |
| PUCK | Valmont | Adjustable Clamp Plate Tie-Back Assembly, Valmont/SitePro1 |
| QMSP-384 | Valmont | 13′ Full-Walkway LoPro Platform with (9)84″(2-3/8″ OD) Pipes, Valmont/SitePro1 |
| QMSP-496 | Valmont | Quick-Pull Full walkway platform, Valmont/SP1, w/12 mtg pipes. |
| RMQLP-496 | Valmont | Low Profile Co-Location Platform for 12 Antennas, 14’6″ Face, 12″-38″ OD Ring Mount, (3) Support Arms, Grating, (12) 2-38″ OD x 96″ Antenna Mounting Pipes and All Hardware |
| RTCUH | Valmont | Hardware Kit for Roof top Kits |
| RTW-12-3-126 | Valmont | 12.5′ Non-Penetrating Ballast Mount, Valmont/SitePro1 |
| SAM-U | Valmont | Universal Stiff Arm Attachment 1″ -6″ round, 1″-6″ 60degree angles 1″-4″ 90 degree angles |
| SBWM | Valmont | (2) B2018 Slider Brackets Wall Mount,Valmont/SitePro1 |
| SBWM-312 | Valmont | Slider Bracket Wall Mount 2 Pcs, Valmont/SP1,Fits 3-1/2″OD Pipe |
| SCX1-K | Valmont | Crossover Plate, Valmont/SitePro1 |
| SCX3-K | Valmont | Crossover Kit 3-1/2″x3-1/2″, Valmont/SitePro1 |
| SCX4 | Valmont | Crossover Plate, 3/8″ x 7″ x 8-1/2″, Valmont/SitePro1 |
| SCX7-U | Valmont | Universal Crossover Plate Kit, 1.5″-3.5″ to 1.5″-4.5″, Valmont/SitePro1 |
| SDF12-U | Valmont | Swift Deploy Frame, 12′ 6″, Valmont/SitePro1 |
| SNBX3 | Valmont | Mini Cluster Box, Valmont/SitePro1 |
| SNBX6 | Valmont | Medium Cluster Box 6 snap in holes, SitePro1/Valmont |
| SP126 | Valmont | 3 ½” x 10’6″ Base Shoe Pipe, Valmont/SitePro1 |
| SP1543 | Valmont | Valmont, 8-Run Rooftop Coax |
| SP216-12-NS | Valmont | Cellular Pipe Frames 12′-6” Length |
| SP219 | Valmont | Pipe Support Kit 2-3/8″ – 3-1/2″, Valmont/SitePro1 |
| SP219-126 | Valmont | Pipe Mount Kits – 2-3/8″ x 126″, Valmont/SitePro1 |
| SR12 | Valmont | 1/2″ Foam Coax Cushion Insert for 4″ Boot, Valmont/SitePro1 |
| SR12-K | Valmont | 1/2″ Single Hole Cushion Hanger Kit (Pkg of 5), Valmont/SitePro1 |
| SR124 | Valmont | 1/2″x 4 Hole Cushion Insert |
| SR782-K | Valmont | Cushion Hanger Kits (7/8” Coax 2 Hole) |
| SR784-K | Valmont | CUSHION HANGER 7/8″ 4 RUNS |
| SS38R-12 | Valmont | 12″ 3/8″ Threaded Rod Ea., Valmont/SitePro1 |
| SS38R-6.5 | Valmont | 6 1/2″ 3/8″ Threaded Rod Ea., Valmont/SitePro1 |
| SSCK | Valmont | Crossover clamp set, Valmont/SitePro1 |
| STK-U | Valmont | Universal Sector Frame Stiff Arm Kit, Valmont/SitePro1 |
| STK2 | Valmont | 1.5″-3″ SS Standoff Kit 10pk” For 3/8″ Hardware 10/pk SitePro/Valmont |
| STK2 | Valmont | 1.5″-3″ SS Standoff Kit 10pk” For 3/8″ Hardware 10/pk SitePro/Valmont |
| STK2-U | Valmont | Universal Tower Standoff Kit 1-1/2″-3″ (Kit of 10), Valmont/SitePro1 |
| SWA123 | Valmont | 1/2″x3-3/4″ S/S Swedge Anchors |
| SWK58 | Valmont | Solid Wall Mount Kit, Valmont/SitePro1 |
| TB2-U | Valmont | 1-1/2″ – 3″ Trapbox Universal 1.5″-3″ Stand-off Kit 10/pack |
| TCHM3 | Valmont | Triple sector Chain Mount |
| TRPD-HD | Valmont | Tripod, Light Duty, 9.5′, Non-Pen, Valmont/SitePro1 |
| UB1024 | Valmont | Valmont, 24′ Aluminum |
| UB1212 | Valmont | Ubolts, 1/2″ x 2-1/2″ x 4″, Valmont/SitePro1 |
| UB3200 | Valmont | 2″ U-bolt, Valmont/SitePro1 |
| UB3312 | Valmont | 3/8″x 3-1/2″ Galv U-Bolt “ |
| UQB4 | Valmont | Quad Universal Ring Mount Kit (Fits poles 12″ to 60″), Valmont/SitePro1 |
| USF12-384-U | Valmont | Sector Frames, Valmont/SitePro1 |
| USF14-472-U | Valmont | 14′ 6″ Universal Sector Frame, Valmont/SitePro1 |
| VFA12-U | Valmont | 12′ 6″ V-Frame Assembly, Valmont/SitePro1 |
| WK1S | Valmont | Standard Weatherproofing Kit Ea., Valmont/SitePro1 |
| WK3S | Valmont | Super Weatherproofing Kit, Valmont/SitePro1 |
| ZB12 | Valmont | Z-bracket wall mount. # of runs -4, Valmont/SitePro1 |
| ZB36 | Valmont | Z-Bracket, Coaxial Cable Support, 12 Cable 2′ 6-1/2″ long, Valmont/SitePro1 |