Make sure to email Launch 3 at sales@launch3.net or call at 877-878-9134 to acquire the following inventory:
| Manufacturer | Part Number | Description |
| Alcatel-Lucent | 3HE02773AA | 3HE02773AAAA01 SAR-8 7705 SIAD SUB RACK CHASSIS CASE ROUTER |
| Alcatel-Lucent | 3HE06151AA | 3HE06151AAAB01 A8-1GB-SFP 8-port GigE SFP.Enhanced Performance Ethernet Card – supporting Ethernet/VLAN services. Includes 8 SyncE capable.GigE ports. SFPs sold separately. This card is supported in both -48 VDC and +24 VDC systems. Module goes into ALU 7705 SAR-8 SIAD Router |
| Alcatel-Lucent | 3HE02774BA | CSM +24V SAR Control and Switch Module 8 Gbps MR:13 3HE02774BAAA01 3HE02774BAAA |
| Alcatel-Lucent | 3HE02778BA | 7705 SAR-8 24V FAN CARD |
| Alcatel-Lucent | 3HE03400AA | 3HE03400AAAA02 ALCATEL-LUCENT 7705 SAR-8 POWER CABLE |
| Alcatel-Lucent | 08-0037-01 | 7705 SAR-8 SIAD Router Cable |
| American Fittings Corp | STR20090 | 2″ 90 Liquidtight Connector – Reusable |
| American Fittings Corp | STR20045 | 2″ 45* liquid tight connector malleable iron CSA rated |
| American Fittings Corp | STR20045 | 2″ 45* liquid tight connector malleable iron CSA rated |
| Andrew | F4A-PDMDM-3M | CommScope: 3 METRES JUMPER CABLE (MALE-MALE) RF |
| Andrew | L4A-PDMDM-20-USA | Andrew L4A-PDMDM-20-USA Jumper 20ft 7/16 DIN Male New |
| Andrew | F4A-DM-25-P | Andrew Sureflex Assembly 25FT Cable
ANDREW 25′ SureFlex Jumper. Consists of FSJ4-50B 1/2″ superflexible cable with DIN Male on one end and Right Angle DIN Male on the other end. |
| Andrew | LDF4-50A | LDF4-50A, HELIAX Low Density Foam Coaxial Cable, corrugated copper
The Andrew LDF4-50A 1/2 inch foam dielect 50 Ohm coax cable features a 5 inch bending radius that prevents kinking. This coaxial cable has an annular corrugated copper outer conductor and a copper-clad aluminum center conductor. Maximum frequency capacity is 8.8 GHz. The Andrew 1/2 inch standard coax cable with foam dielect is available in bulk and is priced per foot. |
| Andrew | LDF4-50A | LDF4-50A, HELIAX Low Density Foam Coaxial Cable, corrugated copper
The Andrew LDF4-50A 1/2 inch foam dielect 50 Ohm coax cable features a 5 inch bending radius that prevents kinking. This coaxial cable has an annular corrugated copper outer conductor and a copper-clad aluminum center conductor. Maximum frequency capacity is 8.8 GHz. The Andrew 1/2 inch standard coax cable with foam dielect is available in bulk and is priced per foot. |
| Andrew | LDF4-50A | LDF4-50A, HELIAX Low Density Foam Coaxial Cable, corrugated copper
The Andrew LDF4-50A 1/2 inch foam dielect 50 Ohm coax cable features a 5 inch bending radius that prevents kinking. This coaxial cable has an annular corrugated copper outer conductor and a copper-clad aluminum center conductor. Maximum frequency capacity is 8.8 GHz. The Andrew 1/2 inch standard coax cable with foam dielect is available in bulk and is priced per foot. |
| Appleton | LL200 | Conduit Body, Type: LL, FM35, Size: 2″, Material: Malleable Iron. |
| Appleton | LB-200M | Conduit Body, Type: LB, Size: 2″, Form 35, Malleable Iron |
| Arlington | NMLT150 | Non-Metallic Liquidtight Connector, Straight, 1-1/2″, UV Rated Plastic, Sealing Ring, For Non-Metallic Liquidtight – Type B; Flexible Non-Metallic Tubing, UL, CSA |
| Arlington | EMT300C | Push – On Non- Metallic Pipe Cap Protector For AL/Steel EMT 3″ Capped Bushing, Insulating, 3″, Threadless, |
| Bridgeport | 475-LT2 | 2″ Die Cast Zinc 90-Degree Liquid Tight Connector. Connector, Liquid Tight, 90 Degree, Cast Zinc, Size 2 Inch. 90 Degree connector for use with metallic and nonmetallic “Type B” liquid tight conduit. 1″ and up cast zinc. |
| Bridgeport | 475-LT2 | 2″ Die Cast Zinc 90-Degree Liquid Tight Connector. Connector, Liquid Tight, 90 Degree, Cast Zinc, Size 2 Inch. 90 Degree connector for use with metallic and nonmetallic “Type B” liquid tight conduit. 1″ and up cast zinc. |
| Bridgeport | 156-DC | 2″ Myers Hub, Threaded Type; Ball Burnished Mirror Smooth Die Cast Zinc Body, Buna N Sealing Ring Material; 2 3/4 Inch Dia X 2 1/8 Inch L Size; Rigid Conduit |
| Bridgeport | 455-SLT | 45 Deg Liquid Tight Conn |
| Bridgeport | 904 | 904 1-1/4 Mall Cond Strap1 Hole Type; Zinc Electroplated Malleable Iron Material; 2 3/8 Inch; 1 1/16 Inch; Rigid Conduit/Imc Used On; Ul 514-B, Ul (Canada and Us), Csa Approval; 50 Standard Package; 1 1/4 Inch Trade Size; 7/16 Inch Hole/Bolt Size; B[R] Brand |
| Bridgeport | 3103 | 1 1/4″Malleable IronRigidCompression Coupling |
| Bridgeport | 906 | To support rigid conduit and IMC to mounting surface.Strap, One Hole Pipe, Malleable Iron, Size 2 Inch |
| Ciena | MISC-MKHF01 | CN 3911, UAM, H-FRAME MOUNT KIT |
| Conduit | 2202200 | Rigid Conduit Elbow, 90 Deg, Conduit Size 2 In, Galvanized Steel, |
| Connect-It | WET12AL | The GSIC gel closure is a weatherproofing system that seals jumper-to-feeder and jumper-to-antenna connectors that are exposed to the outside environment. The housing contains an innovative gel material that provides an efficient moisture block. The ease of installation and the long-term protection makes it a reliable and cost-effective solution. |
| Crouse Hinds | LT20090 | Liquidtight Flexible Metallic Conduit Fittings 90 degree Angle Connectors. Malleable Iron. Male connector, w/out insulated throat bushing, 2” |
| Crouse Hinds | LT20090 | Liquidtight Flexible Metallic Conduit Fittings 90 degree Angle Connectors. Malleable Iron. Male connector, w/out insulated throat bushing, 2” |
| Crouse Hinds | LB65 | 2″, LB, Series 5, Rigid Condulet Conduit Body |
| Eaton | WMZT1C05 | 5 Amp, 1-Pole, WMZT Series Din Rail Mount Circuit Breaker, 277/480V AC, 48V DC, 10 kAIC. C Curve, 5 – 10X In Current Rating. UL 489. Has Been Replaced by Eaton FAZ-C5/1-NA-SP |
| Emerson | MHSA10B | 10A DC-DC CONVERTER MOD 486800127 |
| Garvin | MLB200 | 2″ Malleable Iron LB Style Conduit Body |
| Garvin | MT200 | 2″ Malleable Iron T Style Conduit Body
2″ T style conduit bodies are attached to 2″ threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintenance and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries’ T style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. They are zinc electro plated and have a water-tight gasket to ensure a weatherproof installation |
| Garvin | MBC-3816 | Malleable Iron Beam Clamp With 1-1/8″ Jaw Opening and 3/8-16 Threaded Holes |
| Garvin | LR200 | 2″ Powder Coated Die Cast Aluminum LR Style Conduit Body |
| Hubbell | RHC080806 | 8”Hx8″wx6”D, NEMA 3R enclosure, hinge cover wiring or junction box, outdoor duty, wall mount. Requires N1P0808 sub-panel |
| Hubbell | B080804SC | JIC,CS,SCREW COVER,8X8X4 |
| Hutton | HSF-L4A-DMDM-20-P | 20 ft DIN Male to DIN Male jumper standard coax |
| JMC Steel Group | E-32152-C | Elbow rigid 90 Degree STD RAD |
| Madison Electric | N-200-CL | Rigid Conduit Nipples; 2 Inch, Close Length, Threaded, Galvanized Steel |
| Madison Electric | N-200300 | Rigid Conduit Nipples; 2 Inch x 3 Inch, Threaded, Galvanized Steel |
| Madison Electric | 704 | 1-1/4 RIGID 1-H STRAP |
| Madison Electric | 706 | 2” One hole rigid strap, zinc electroplated steel. Snap-On feature, reinforced rib for added strength. Bright Zinc electroplated steel. |
| Mersen | FSLBST16 | Mersen load break disconnect toggle switch. It is a newly designed industrial-grade switch capable of making or breaking loads up to 600 voltage. It is suitable as a motor disconnect. Extremely compact and robust, these switches have a variety of mounting options including din-rail, base, or door-mounting. A wide assortment of handles, shafts and accessories are available to accommodate any installation requirement. Toggle styles have a built-in pad-lockable hasp and the integrated box terminals are finger-safe to IP-20. Utilizing a patented, innovative design, it can be actuated from the front or either side. Highlights: terminals rated for 2 wires, front or side operation, padlockable, compact, robust, din-rail, base, or door- mounting, side-mount auxiliary contacts and additional poles, double-break, silver-plated contacts. Applications: on/off switching and disconnect applications in circuits up to 600 voltage, 80A on the load side of branch circuit protection fusing; motor controller, suitable as motor disconnect, motor isolator, general purpose. With the switch in the Off’ position, a hasp can be deployed that will lock the switch in this position. Approvals: UL 508 listed E196672, CSA 22.2 #14, IEC 60947-3. |
| Moreng Telecom | R2-23-120 | |
| Moreng Telecom | R2-23-120 | |
| NEC | E102090 | 90 degree EMT Elbows 2″ UL797 |
| NEC | E100475 | 1” diameter, 90 degree, galvanized steelAluminum Rigid Conduit Standard Radius Elbows Alum RC Elbows UL listed File #E215519 (UL6A) Elbows manufactured to ANSI C80.5-1994 specifications, Fed Spec’s WW-C-540-A |
| PM Sales Company | HWE 100L45 | 1″ HW ELBOW 45 |
| PPC | WPS-4A | 1/2″ Annular/ Hardline Cable Weather Protection System Seal |
| PPC | WPS-4A | 1/2″ Annular/ Hardline Cable Weather Protection System Seal |
| RFS | 815396-920P | RFS Factory Fit 20′ Jumper. Made with premium 1/2″ cable w/prem DIN males on both ends. Low VSWR on both PCS & Cellular Bands. Low PIM assembly. |
| Schneider Electric | 17414 | Miniature Circuit Breaker – C60 – 1 pole – 5 A – C curve |
| Socomec | 22053000 | SIRCO M1 3X16A TOGGLE |
| Teddico Electrical Products | 605-CGV | GRAY ALUMINUM; 2 INCH HUB; UL, UL (CANADA AND US); INCLUSION COVER, GASKET; |
| Windsor | WI-NMFS075 | 3/4″ LIQUIDTIGHT NON-METALLIC CONNECTORS |