Make sure to email Launch 3 at sales@launch3.net or call at 877-878-9134 to acquire the following inventory:
| Manufacturer | Part Number | Description |
| 3M | FP301 | Heat Shrink Thin-Wall Tubing |
| AC Data | TJ1010B | ISOLATED LOOP CIRCUIT PROTECTORBREAKDOWN VOLT 36-39 |
| ADC | MINI-DSX-1/WM-W | DSX-1 DSX MINI PANEL 8 CIRCUIT |
| Andrew | C240-QMRQMR-35 | 35FT Braided Cable Assembly.CNT-240 CNT Jumper with interface types QMA Male Right Angle and QMA Male Right Angle, 10.67 m |
| Andrew | APTDC-BDFDM-DB | Arrestor Plus LTE Band Quarterwave dc Passing Surge Arrestor (T-shaped), 698-2700 MHz, with interface types DIN Female Bulkhead and DIN Male |
| Andrew | ATM200-002 | Teletilt Actuator, AISG 1.1 default protocol
Connects to the base station antenna for remote electrical tilt LED indicates tilt movement We have New and Refurbished Available ATM200002 Remote Electrical Tilt, ACTUATORS, AISG 1.1, 10?30 VDC |
| Andrew | ATTEN-SMSF-15 | ATTENSMSF15 15 dB Attenuation (dB), 2W MAXIMUM POWER INPUT (W), DC-18 GHZ, BI-DIRECTIONAL |
| Andrew | ATTEN-SMSF-3 | ATTENUATOR:SMA-M TO SMA-F 3 DB 3 dB Attenuation (dB), 2W MAXIMUM POWER INPUT (W), DC-18 GHZ, BI-DIRECTIONAL AT
Attenuator, SMA-m/SMA-f, 3 dB |
| Andrew | ATTEN-SMSF-10 | ATTENSMSF10 10 dB Attenuation (dB), 2W MAXIMUM POWER INPUT (W), DC-18 GHZ, BI-DIRECTIONAL
ATTENSMSF10 10 dB Attenuation (dB), 2W MAXIMUM POWER INPUT (W), DC-18 GHZ, BI-DIRECTIONAL |
| Andrew | ATTENSMSF-5 | Andrew, Attenuator SMA Male
ATTENSMSF15 15 dB Attenuation (dB), 2W MAXIMUM POWER INPUT (W), DC-18 GHZ, BI-DIRECTIONAL |
| Andrew | ATTEN-SMSF-20 | 20 dB Attenuation (dB), 2W MAXIMUM POWER INPUT. Attenuator, SMA-m/SMA-f, 20 dB |
| Andrew | ATTEN-SMSF-4 | ATTENUATOR:SMA-M TO SMA-F 4 DB 50 OHM, 250W
ATTENSMSF15 15 dB Attenuation (dB), 2W MAXIMUM POWER INPUT (W), DC-18 GHZ, BI-DIRECTIONAL |
| Andrew | ATTEN-SMSF-6 | ATTENUATOR:SMA-M TO SMA-F 6 DB |
| Andrew | ATCB-B01-C50 | .5 METER RET cable, AISG-8MM-6 CABLE ASSY, Andrew/Commscope
Teletilt® AISG RET Control Cable, 0.5 m Feeds data and power to RET system components |
| Andrew | C240-NRNR-1 | CommScope: C240-NRNR-1 Braided Cable Aassembly 1 Foot . CNT-240 CNT Jumper with interface types N Male Right Angle and N Male Right Angle, 0.3 m
CNT-240 CNT Jumper with interface types N Male Right Angle and N Male Right Angle, 0.3 m |
| Andrew | C240-SRQMR-1 | CNT-240 CNT® Jumper with interface types QMA Male Right Angle and SMA Male Right Angle, 0.3 m |
| Andrew | 43094 | Lace-up Hoisting Grip for 1/2 in coaxial cable and elliptical waveguide 180 and 220. |
| Andrew | L7SGRIP | L7SGRIP Andrew/CommScope Support Hoisting Grip for 1-5/8 in coaxial cable Dimensions Electrical Specifications General Specifications |
| Andrew | C240-SFQMR-1 | CNT-240 CNT Jumper with interface types SMA Female and QMA Male Right Angle, 0.3 m |
| Andrew | KDXCV0012017 | Broadband Diplexer (Cross Band) |
| Andrew | L4PDM-RC | 7-16 DIN Male RingFlareâ„¢ for 1/2 in LDF4-50A cable |
| Andrew | SFX-ADM | 7-16 DIN Male Right Angle for 3/8 in SFX-500 cable
Interface 7-16 DIN Male |
| Andrew | SSH-12 | SnapStak Hanger for 1/2 in coaxial cable Kit of 10
Hanger Type – SnapÂin hanger ( Snap In Kits) Cables per Hanger – 1 Color - Silver Material Type - Stainless steel Maximum Stack Height – 3 Nominal Size – 1/2 in Compatible Diameter, maximum 16.256 mm | 0.640 in Compatible Diameter, minimum 13.716 mm | 0.540 in Height 41.00 mm | 1.61 in Length 66.00 mm | 2.60 in Width 22.80 mm | 0.90 in |
| Andrew | ATLP200-001 | Lightning Protection Kit, Andrew, ATC200 Series RET
Lightning Protection Unit Provides lightning protection for RET controller and RET components |
| Andrew | 641280-DF | OneBase Crossband CouplerIndoor/Outdoor Diplexer for Dual-BandCombines signals from wireless systems operating in the 806-960 MHz bands with signals from systems operating in the 1710-2170 MHz bands onto a common feeder cable.The Andrew Solutions Crossband Coupler features extremely low insertion loss. A minimum 47 dB isolation is provided between output ports.These couplers use novel suspended stripline printed circuit board technology to provide extremely low insertion loss, high isolation, and high power handling capability in a compact, rugged, weatherproof housing. Sealing gaskets provide protection from moisture ingress at all interfaces.These couplers feature precision 7-16 DIN female connectors and an external grounding stud for lightning protection purposes. A mounting bracket and two band clamps are provided for quick deployment and installation. These units are stackable and do not require additional spacer hardware.This product is also available in different dc block and dc bypass versions. This feature allows full compatibility with systems requiring tower mount amplifiers. The internal dc block design provides lower insertion loss and better reliability than dc block designs that contain ceramic dc blocking capacitors. * Novel stripline printed circuit board * Extremely low insertion loss * Moisture protection * Stackable * Mounting bracket and external grounding stud provided * Integrated dc block/dc bypass versions available |
| Andrew | ATTEN-NMNF-20 | Attenuator N TYPE in line 20 dbAndrew ATTEN-NMNF-20 Attenuator N TYPE in line 20 db |
| Andrew | DF-CAPKIT | Plated 7-16 DIN Female End Cap Assembly |
| Andrew | CBC819-DF | CROSSBAND COUPLER, Outdoor Diplexer Combines 806-940 MHZ and 1850-2000 MHz, DC PASS ON ALL PATHS |
| Greenlee | 7306SB | Slug Buster Hydraulic Punch Driver Set |
| REMEC | PA-AIRT-022 | N0205801 PA-AIRT-022 PDU
PDU G3 19DC +24 1 53 1N Issue Level: 3 |
| RFS | SNAP-ST-12 | Stackable Snap-In Hangers, 1/2″, stainless steel (kit of 10)Stackable hangers from RFS are designed for quick and secure installation of 1/2-, 7/8-, 1-1/4- and1-5/8-inch foam dielectric cable. These one-piece stainless steel hangers save installation time andcost. The hangers, requiring no tools, are easily installed by hand. Robust construction securelylocks the cable in place while allowing for additional cable runs to be stacked up to three deep. Thehangers ensure positive attachment to 19 mm (3/4″) pre-drilled mounting surfaces and easilycombine with RFS universal angle adapters, ANGLE-UI, to mount to angle members on the tower. |
| Site Pro | GL614 | Gauge – 6 Stud Size – 3/8” Hole Spacing – 1” Color – Blue Individual. BUCKETS: Add -B to end of part #. GL614-B UL Listed without inspection windows. Longer barrel lengths than many other brands. Chamfered ends allow easy wire insertion. Color coded Tin plated copper. |
| Site Pro | GL212 | Gauge – 2 Stud Size – 3/8” Color – Brown Individual. BUCKETS: Add -B to end of part #. GL212-B UL Listed without inspection windows. Longer barrel lengths than many other brands. Color coded Tin plated copper. |
| Site Pro | GL606 | Gauge – 6 Stud Size – 3/8” Color – Blue Individual. BUCKETS: Add -B to end of part #. GL606-B UL Listed without inspection windows. Longer barrel lengths than many other brands. Color coded Tin plated copper. |